aetherlink

AetherLink-SDR-MCP: Software Defined Radio Model Context Protocol Server

Control Software Defined Radios and decode radio protocols through an AI-friendly Model Context Protocol interface.

Features

• Protocol Decoders: ADS-B aircraft tracking, POCSAG pagers, AIS ship tracking, Meteor-M LRPT satellites, ISM band devices
• Weather Satellites: Meteor-M2-3/M2-4 LRPT decoding with SatDump
• Advanced Analysis: Real-time spectrum analysis, waterfall displays, signal detection, frequency scanning
• Audio Recording: Demodulate and record FM/AM audio as WAV files
• ISM Band Scanning: Decode 433MHz/315MHz devices (weather stations, sensors, doorbells, tire pressure monitors)
• MCP Integration: Seamless integration with Claude Desktop and other MCP clients
• 26 MCP Tools: Complete SDR control through natural language

Installation

From PyPI (Recommended)

pip install aetherlink
aetherlink --setup

That's it. The --setup command auto-configures Claude Desktop -- it detects your OS, finds the config file, and adds AetherLink without touching your other MCP servers. Then restart Claude Desktop.

Or if you prefer uvx (no install needed):

uvx aetherlink --setup

Note: You still need RTL-SDR system drivers installed. See System Dependencies below.

Full Installer (includes system drivers)

macOS / Linux:

curl -fsSL https://raw.githubusercontent.com/N-Erickson/AetherLink-SDR-MCP/main/install.sh | bash

Windows (PowerShell):

irm https://raw.githubusercontent.com/N-Erickson/AetherLink-SDR-MCP/main/install.ps1 | iex

The installer handles everything: system drivers, Python package, optional decoders, and Claude Desktop configuration.

Windows users: You also need Zadig to replace the RTL-SDR USB driver with WinUSB. The installer will walk you through this.

System Dependencies

AetherLink requires RTL-SDR drivers installed at the system level:

git clone https://github.com/N-Erickson/AetherLink-SDR-MCP
cd AetherLink-SDR-MCP
python3 -m venv venv
source venv/bin/activate
pip install -e ".[dev]"

Quick Start

1. Configure Claude Desktop

Edit ~/Library/Application Support/Claude/claude_desktop_config.json (macOS) or equivalent:

{
  "mcpServers": {
    "aetherlink": {
      "command": "/path/to/AetherLink-SDR-MCP/venv/bin/python",
      "args": ["-m", "sdr_mcp.server"],
      "cwd": "/path/to/AetherLink-SDR-MCP"
    }
  }
}

Important: Replace /path/to/ with your actual path. Run which python with your venv activated to find the correct Python path.

2. Restart Claude Desktop

Quit completely (Cmd+Q) and restart Claude Desktop to load the MCP server.

3. Test the Connection

In Claude Desktop:

Connect to my RTL-SDR

You should see: "Successfully connected to RTL-SDR"

Troubleshooting

• Server not appearing: Check logs at ~/Library/Logs/Claude/mcp-server-aetherlink.log
• "Device busy" errors: Only one program can use the SDR at a time. Close GQRX, SDR#, or other SDR software.
• Linux device permissions: Add udev rules for RTL-SDR (/etc/udev/rules.d/20-rtlsdr.rules) and blacklist the dvb_usb_rtl28xxu kernel module.
• E4000 tuner gap: Frequencies 1084-1239 MHz may not work on E4000-based dongles. This is normal hardware behavior.

Supported Hardware

Protocol Support

Protocol Details

ADS-B (1090 MHz):

• Uses dump1090 subprocess for demodulation and raw TCP output
• pyModeS for DF/CRC-filtered ADS-B message decoding
• Defaults to a 120-second capture; set duration=0 to run until stopped
• Tracks callsign, altitude, speed, heading, vertical rate, message count
• Optional aircraft registration/type/operator lookup via hexdb.io
• Emits live tracking links for observed ICAO addresses
• FULLY TESTED AND WORKING

POCSAG (152/454/929 MHz):

• Uses multimon-ng for professional decoding
• Supports 512/1200/2400 baud
• Alphanumeric and numeric messages
• Common frequencies: 152.240 MHz, 454 MHz, 929-931 MHz

AIS (161.975/162.025 MHz):

• GMSK demodulation (simplified)
• Decodes ship position, speed, type
• Requires coastal location

Meteor-M LRPT (137 MHz):

• Uses satdump subprocess for OQPSK demodulation
• Digital LRPT transmission with error correction
• Decodes visible and infrared channels
• Active satellites: Meteor-M2-3 (137.9 MHz), Meteor-M2-4 (137.9 MHz primary, 137.1 MHz backup)
• CURRENT WEATHER SATELLITE STANDARD (replaced NOAA APT)

ISM Band (433/315/868/915 MHz):

• Uses rtl_433 subprocess for decoding
• Multi-frequency hopping support
• Decodes 200+ device types automatically
• Weather stations, sensors, doorbells, tire pressure monitors, remote controls
• Common frequencies: 433.92 MHz (EU/Asia), 315 MHz (NA), 868 MHz (EU), 915 MHz (NA)

Available MCP Tools (26 Total)

Core SDR Control (5 tools)

• sdr_connect - Connect to RTL-SDR or HackRF
• sdr_disconnect - Disconnect from SDR
• sdr_set_frequency - Set center frequency in Hz
• sdr_set_gain - Set gain (dB or 'auto')
• sdr_get_status - Get hardware status

Aviation (3 tools)

• aviation_track_aircraft - Start ADS-B tracking on 1090 MHz
• aviation_stop_tracking - Stop tracking
• aviation_get_aircraft - Get list of tracked aircraft

Pager Decoding (3 tools)

• pager_start_decoding - Start POCSAG decoder
• pager_stop_decoding - Stop decoding
• pager_get_messages - Get decoded messages

Marine (3 tools)

• marine_track_vessels - Start AIS ship tracking
• marine_stop_tracking - Stop tracking
• marine_get_vessels - Get vessel list

Weather Satellites (1 tool)

• satellite_decode_meteor - Decode Meteor-M2-3/M2-4 LRPT satellite pass

ISM Band Devices (3 tools)

• ism_start_scanning - Start scanning ISM bands (433/315/868/915 MHz) with multi-frequency hopping
• ism_stop_scanning - Stop ISM band scanning
• ism_get_devices - Get detected devices (weather stations, sensors, etc.)

Analysis (5 tools)

• spectrum_analyze - Analyze RF spectrum (FFT, signal detection)
• spectrum_scan - Scan frequency range
• recording_start/recording_stop - Record raw IQ samples (saved to /tmp/sdr_recordings/)
• audio_record_start/audio_record_stop - Record demodulated audio as WAV (FM/AM)

HackRF Transmit (2 tools)

• hackrf_set_tx_gain - Set transmit gain
• signal_generator - Generate and transmit signals

Usage Examples

Track Aircraft

Track aircraft in my area

After 30-60 seconds:

Show me the aircraft

Decode Pagers

Set frequency to 152.240 MHz
Start paging decoder at 1200 baud

Wait a few minutes, then:

Get pager messages

Note: Check RadioReference.com for active pager frequencies in your area.

Analyze Spectrum

Set frequency to 100 MHz
Analyze the spectrum

Scan for Signals

Scan from 430 MHz to 440 MHz with 1 MHz steps

Record Audio from FM Radio

Set frequency to 103.7 MHz
Start audio recording with FM modulation and description "Local FM station"

Wait for desired duration (e.g., 30 seconds), then:

Stop audio recording

Files saved to: /tmp/sdr_recordings/audio_YYYYMMDD_HHMMSS_XXXMHz_FM.wav

Record Raw IQ Samples

Set frequency to 103.7 MHz
Start recording with description "Raw baseband data"

Wait for desired duration, then:

Stop recording

Files saved to: /tmp/sdr_recordings/recording_YYYYMMDD_HHMMSS_XXXMHz.iq

Use case: Advanced analysis, replay, or processing with GNU Radio/SDR#

Meteor-M Weather Satellite (when overhead)

Decode Meteor-M2-4 satellite for 600 seconds

Requirements:

• SatDump installed (brew install satdump)
• Satellite pass overhead (use tools like Gpredict, N2YO, or Heavens-Above to predict passes)
• Ideally a V-dipole antenna tuned for 137 MHz

What you get:

• Visible light channel images
• Infrared channel images
• Composite RGB images
• Saved to /tmp/sdr_recordings/meteor_METEOR-M2-4_*/

Tips:

• Meteor-M2-4 transmits on 137.9 MHz (primary) or 137.1 MHz (backup)
• Best results with satellite elevation >30°
• Full pass is typically 10-15 minutes
• Use higher gain (40-49 dB) for weak signals

Scan ISM Band Devices

Start ISM scanning on 433.92 MHz and 315 MHz with 30 second hop interval

Wait 1-2 minutes for devices to transmit, then:

Show me the ISM devices

Common devices detected:

• Weather stations (temperature, humidity, wind, rain)
• Wireless thermometers
• Tire pressure monitoring systems (TPMS)
• Door/window sensors
• Doorbells and remote controls
• Soil moisture sensors

Tips:

• Weather stations typically transmit every 30-60 seconds
• 433.92 MHz is common in Europe/Asia
• 315 MHz is common in North America
• Try different frequency combinations: [433.92, 315] or [868, 915]
• Increase hop interval for more dwell time per frequency

Development

Project Structure

AetherLink-SDR-MCP/
├── sdr_mcp/
│   ├── server.py              # Main MCP server (26 tools)
│   ├── __main__.py            # python -m sdr_mcp entry point
│   ├── hardware/
│   │   ├── base.py            # Abstract SDR device base class
│   │   ├── rtlsdr.py         # RTL-SDR interface
│   │   └── hackrf.py         # HackRF interface
│   ├── decoders/
│   │   ├── pocsag.py         # POCSAG pager decoder
│   │   ├── ais.py            # AIS ship decoder
│   │   ├── rtl433.py         # ISM band device decoder
│   │   └── meteor_lrpt.py    # Meteor-M LRPT satellite decoder
│   ├── analysis/
│   │   └── spectrum.py        # Spectrum analysis, signal detection
│   └── utils/
│       └── validators.py      # Input validation and safety checks
├── tests/                     # All test scripts
├── pyproject.toml             # Package configuration
└── readme.md                  # This file

Architecture

Device Management:

• RTL-SDR and subprocess decoders use exclusive device access
• Python SDR control and subprocess tools (dump1090, rtl_433) cannot run simultaneously
• Subprocess-based decoders automatically disconnect Python SDR
• Stopping decoder reconnects Python SDR control

Decoders:

• ADS-B: dump1090 subprocess + pyModeS + optional hexdb.io lookup
• ISM Band: rtl_433 subprocess with JSON output + multi-frequency hopping
• POCSAG: rtl_fm + multimon-ng pipeline
• AIS: Built-in GMSK demodulator (simplified)